The CA-IS310X is a highly stable, isolated operational amplifier widely used in power systems. This series of chips in the secondary side of the inheritance of high performance high bandwidth operational amplifier, used to feedback and amplify error signals. The amplified error signal is transmitted to the primary side through the buffered output. The CA-IS310X offers faster response, higher stability, and longer life than the optocoupler.
Ca-is310x also has the characteristic of stable transfer function, that is, it does not change with time and temperature, which is impossible to achieve by traditional optocoupler.
Ca-is310x isolation amplifier selection table
料号
隔离耐压（VRMS）
爬电距离
（mm）
最大直流工作隔离电压
（V）
最大交流工作隔离电压（V）
最大浪涌隔离电压（Vpk）
温度范围
(℃）
封装形式
CA-IS3101B
2500
4
566
400
5000
-40~125
SSOP16
CA-IS3102W
5000
8
1414
1000
6250
-40~125
SOIC16-WB（W）
所有数据仅供初步选型时参考，正式选型请以产品手册为准。
02 High stability
The REFOUT voltage of the device is less than 1mV in the range of -40 °C to 125°C, and the measured voltage is <0.04%. COMP to EAOUT gain changes slightly, measured 1.5%; The gain from EAOUT to EAOUT2 changes slightly, which is less than 0.5%.
3 high precision
REFOUT voltage:
1) The initial error at room temperature shall not exceed 0.5%.
2) -- 40°C to 125°C error no more than 1%.
3) REFOUT2 Connect the positive phase input of the internal operational amplifier to provide accurate reference voltage.
04 wide range
1) Wide operating temperature range, -40 °C to 125°C, suitable for industrial applications.
2) Wide operating voltage range, VDD1 and VDD2 input voltage 3V~20V.
3) The overall bandwidth is 400kHz, suitable for most isolating switching power supply applications.
Material microelectronics chipanalog | sichuan soil
Edit | media center